Go to Main text Go to Main Menu

TRILOY® 200FT

PC/ABS

Inquiry

TYPICAL DATA OF TRILOY® 200FT GRADE

PROPERTY UNIT ASTM METHOD TYPICAL DATA
Physical
Specific Gravity - D792 1.08
Water Absorption (24 hours at 23℃) % D570 0.2
Melt Flow Rate (250℃, 5kg) g/10min D1238 26
MECHANICAL
Tensile Strength at yield kgf/㎠ D638 550
Tensile Elongation at break % D638 50
Flexural Strength at yield kgf/㎠ D790 850
Flexural Modulus kgf/㎠ D790 23,000
Izod Impact Strength, notched, 23℃ (1/8”) kgf∙㎝/㎝ D256 65
Rockwell Hardness R scale D785 100
THERMAL
HDT, 18.6 ㎏f/㎠ D648 100
ELECTRICAL
OTHERS
Mold Shrinkage (3mm thickness) % D955 0.5~0.7
※The figures listed in this table are typical values obtained under the standard test methods and may not be applicable for products that are under different application condition.

PROCESSING GUIDE FOR TRILOY® 200FT GRADE

General processing conditions for TRILOY® 200FT are shown below.
Drying prior to processing is essential to ensure desired appearance and property performance.

SPECIFICATION UNIT CONDITIONS
Drying Temperature 80~90
Drying Time hr 3~5
Moisture Content, Max % 0.02
Melt Temperature 240~270
Nozzle Temperature 245~255
Front Temperature 250~260
Middle Temperature 250~260
Rear Temperature 240~250
Mold Temperature 60~90